Best #1 Case IH Engine Rebuild Belden, PA

Info
Services
Video
Tractors For Sale
About
Contact

Case IH Engine Rebuild

Old Pike Tractor

Skip the hassle and go with Elverne Martin a tractor specialist

Have your engine or the whole tractor transported to our shop and we will rebuild your engine and have it running as new

Our price is
HALF
of Dealerships
Contact:
Elverne Martin
(814) 494-1943

What You Get After Having Your Case IH Engine Rebuilt

Cost Efficient

  •  You will have some money left over in your bank account due to our shop price being $50 an hour, unlike the dealerships that are around $100 an hour.
  • A minor overhaul with parts replacement is defiantly cost-effective
  • A major issue can be repaired and cost less than a whole new engine.
  • If you plan to use the tractor heavily for many years, a rebuild is a good investment.

Performance

  •  Increased power and torque, with replacing worn pistons, rings, bearings, and valves will significantly improve compression and combustion, leading to more power and torque.
  • Improved fuel efficiency, with less friction and new seals and gaskets, will ensure all the fuel is being used for combustion.
  • Enhanced life span.
  • Reduced emissions

Peace of Mind

  • Knowing that your engine is in top performance.
  • Knowing that your engine is now reliable.
  • Knowing that your rebuilt engine is performing and running for a fraction of the price.

Services

Our Process When Rebuilding a Case IH Engine


The Process of a Case IH engine rebuild is complex and involved and should be left to an experienced mechanic who has the skills, patience, and right tools to do the job. Here’s a general overview of what we do at Old Pike Tractor:

Preparation:

  1. Gather information: Identify the specific engine model we’re working on and obtain a workshop manual. This will be our essential guide throughout the process to make sure everything is up to spec.
  2. Assess the damage: Inspect the engine for worn parts, cracks, and other damage. This will help us to determine the scope of the rebuild and the parts we need.
  3. Tools and parts: We acquire the necessary parts to replace, based on our assessment and the workshop manual. Many times it requires special tools to replace and rebuild engine parts.
  4. Clean the workspace: We create a clean and organized workspace to prevent contamination and keep track of parts. We never want to find that extra bolt.

Disassembly:

  1. Drain fluids: We remove and dispose of the engine oil, coolant, and any other fluids according to safety regulations.
  2. Disconnect peripherals: Remove all external components like the starter, alternator, exhaust, and intake manifolds.
  3. Disassemble the engine: Following the workshop manual, meticulously disassemble the engine, taking careful note of the order and orientation of parts. Label and organize parts to ensure proper reassembly.

Cleaning and Inspection:

  1. Clean all parts: We thoroughly clean all components using a degreaser and appropriate methods for each material.
  2. Inspect for wear and damage: Carefully inspect all parts for wear, cracks, or other damage and replace any questionable parts.
  3. Measure critical components: Measure components like cylinder bores, crankshaft journals, and bearing clearances to determine if machining is necessary.
Case IH Engine Rebuild Belden, PA

Machining and Reconditioning:

  1. Machine engine block: This may involve boring cylinders, resurfacing the block deck, and honing cylinders to achieve proper specifications.
  2. Recondition other components: Crankshafts may need grinding, and other parts may require specialized reconditioning depending on their condition.

Assembly:

  1. Following the workshop manual: Carefully we reassemble the engine, adhering to the torque specifications and assembly procedures outlined in the manual.
  2. Use new gaskets and seals: Replace all gaskets and seals with new ones to prevent leaks.
  3. Lubricate components: Applying proper lubrication to all components before assembly to minimize wear during initial startup.

Final Steps:

  1. Install peripherals: We reattach all external components like the starter, alternator, exhaust, and intake manifolds.
  2. Fill fluids: We add fresh engine oil, coolant, and other fluids according to the manufacturer’s recommendations.
  3. Start the engine: Following safety precautions, attempt to start the engine and check for leaks, unusual noises, or vibrations.
The task of a Case IH engine rebuild requires significant expertise. This is just a general overview, and the specific steps involved will vary depending on the engine model and our approach.

YouTube Videos

See videos on all we provide for Tractor service, repairs, and maintenance

YouTube Channel

YouTube

This video is private.

About Old Pike Tractor Service and Repairs. In New Enterprise Pa

2 0

YouTube Video UEw4MjJ2OVo4cXZzR3ZzZ19ZdFJlTkZHdzAzUzAwT1FRSy41NkI0NEY2RDEwNTU3Q0M2

Private video

Vita-Farms January 19, 2024 3:36 pm

This video is private.

If you need a tractor fixed go to https://menonitemechanic.com/product-category/service/
In this case, we have a John Deere harvester, and the AC system stopped working due to the compressor seizing up. Elvern the Mennonite Mechanic took the time to flush the system before replacing the part and charging the system because there could be a chance that containments would be in the system causing the compressor to fail once again. It is costly to flush the system but it is the right way to avoid further costs not doing it right in the first place.


royalty free Music by Giorgio Di Campo for @FreeSound Music
http://freesoundmusic.eu
https://www.facebook.com/freemusicfor…
/ freesoundmusic
Original video: (link to original clip in our channel)

4 0

YouTube Video UEw4MjJ2OVo4cXZzR3ZzZ19ZdFJlTkZHdzAzUzAwT1FRSy4yODlGNEE0NkRGMEEzMEQy

Private video

Vita-Farms January 19, 2024 3:36 pm

This video is private.

In this video, the Elvern the Mennonite Mechanic fixes a T6020 New Holland. He repaired the synchronizer for high and low in the transmission and also repaired the pump injector plus the air conditioner and heater. The Mennonite Mechanic put this tractor to the test and it passed.
If you are in need of a repair on a tractor you can go to https://menonitemechanic.com/ and contact Elvern for any repairs that need to be done.

2 2

YouTube Video UEw4MjJ2OVo4cXZzR3ZzZ19ZdFJlTkZHdzAzUzAwT1FRSy4wMTcyMDhGQUE4NTIzM0Y5

Private video

Vita-Farms January 19, 2024 3:37 pm

This video is private.

We replaced the bad turbo with a John Deere reman turbo.
1. Replace faulty part
2. Prelube
3. New gaskets
4. Inspect to make sure everything is as good as new.
5. Reprogram the ECU
6. Put it on the Dyno to test it.
This job particular job took about 8 hours at the shop rate of $50 an hour, the customer saved half of what it would have cost at a dealership.

2 0

YouTube Video UEw4MjJ2OVo4cXZzR3ZzZ19ZdFJlTkZHdzAzUzAwT1FRSy41MjE1MkI0OTQ2QzJGNzNG

Private video

Vita-Farms January 23, 2024 1:00 am

This video is private.

You can expect after having an engine rebuilt is, More money in your pocket-book, it is cost effective.
You’l notice increased performance, runs smoother, less oil consumption, increased power.
Increased life-span of the engine, and have peace of mind.

What we do here at Old Pike Tractor when we rebuild Engines:
(1) Preparation is done, We get all the information on the type of engine we are working on, and we will also prepare the workshop to keep it organized and cleaned so we do miss any parts.
(2) Disassemble, as we take apart the engine we inspect all the parts for any wear, cracks or leaks that need fixed.
(3) Cleaning and inspecting, after the disassembly we clean the parts, we look over the parts one more time for any issues.
(4) Machining, we take the necessary means and precautions to machine the engine.
(5) Assembling, we make sure to use the proper specs while assembling the engine and add new seals and gaskets. We also lubricate all necessary components.
(6) Instal, we reattach all external components, add all fresh fluids.

9 0

YouTube Video UEw4MjJ2OVo4cXZzR3ZzZ19ZdFJlTkZHdzAzUzAwT1FRSy4wOTA3OTZBNzVEMTUzOTMy

Private video

Vita-Farms February 6, 2024 4:57 am

Tractors For Sale!

For more info call Elverne Martin at (814) 494-1943

About Us

Case IH Engine Rebuild New Belden, PA

Family Business

We are a small family-run business, and our overhead cost is low. Therefore, we can repair any equipment at a reasonable cost. We will give you an estimate of what a repair might cost before we start so you can always decide whether to have the repairs done or not.

What is our Business About

We are here to serve all your repair needs on your tractors. We rebuild engines, fix air conditioners, rebuild transmissions, and do many other repairs from small fixes and maintenance issues to large complicated problems. Our hourly rates are half of that of a dealership.

Tractor Sales

We buy and sell tractors. Call us if you need a tractor, and we can provide the right one for you, if it’s not on our lot we can make sure we’ll put you in contact with someone who might have what you’re looking for or let us sell your tractor for you, if you are looking to sell your tractor for whatever reason but don’t have the means to advertise, we can help you out with that.

Contact Us

Case IH Engine Rebuild Belden, PA

Tractor Repairs

See Website

Click Here

Call

(814) 494-1943
Call Elverne Martin with any question you have and he will try and give you the best answer from his 15 years of experience.

Useful links

Also serving the following areas

Scroll to Top